Guidelines on implementing spill impact mitigation assessment (SIMA)

The global oil and gas industry association for environmental and social issues | Document | 2018

A key objective for any oil spill response is to minimize the impacts to ecological, socio-economic and cultural resources at risk through the development of a safe and effective response strategy. Contingency planners and incident managers have traditionally utilized a net environmental benefit ana...

The International Association of Oil & Gas Producers Regulators Use of Standards

The International Association of Oil & Gas Producers | Document | 2010

This report reflects the current situation of selected national regulators’ reference and use of national, regional, international and industry standards in their regulatory documents, with a particular focus on standards for materials, equipment, systems and structures for the offshore petroleum in...

Early Kick Detection Through Liquid Level Monitoring in the Wellbore

Society of Petroleum Engineers | Document | 1998

This paper proposes the use of an acoustic device installed on the casing valve to continuously monitor the liquid level in the annulus of wells experiencing complete loss of returns. A rise in liquid level can be interpreted as an early indication of a kick during drilling or tripping operations. T...

International Association of Oil and Gas Producers Value of Standards

International Association of Oil and Gas Producers | Document | 2014

This document allows you to discover the values of standards and the benefits of standarisation activities.

The Role of Standards in Innovation

Technological Forecasting and Social Change | Document | 2000

We review and explore the role of standards in innovation, with particular emphasis on the design and manufacturing processes. We begin by defining and classifying standards and by exploring their role and infrastructure in society. This is followed by a similar discussion for innovation. By examini...

How Industry and Government are Improving the Safety of Offshore Energy Development in the Post-Macondo Era

American Petroleum Institute | Document | 2015

The oil and natural gas industry and the federal government have together taken great strides to enhance the safety of offshore drilling operations. The industry has placed a particular focus on increasing its ability to prevent spills from occurring, intervene to halt any spill that does occur ...

Global Standards: Building Blocks for the Future OTA Project Staff

U.S. Office of Technology Assessment | Document | 1992

Looking across industry sectors, this study evaluates the U.S. standards setting process in the light of its changing economic and technological environment, and compares it to processes in other countries. In cases where specific problems can be identified, it suggests alternative strategies and ...

Crude Oil Processing on Offshore Facilities

Piping Engineering | Document | 2017

This design guide is prepared to provide basic information and consideration for the process design aspect of Crude Oil Processing for typical offshore facilities. This document provides an overview of separation of crude oil from well fluid for further processing.

Well Completion for Gas Hydrate Production

GRID-Arendal | Document | 2009

Well schematics show possible horizontal and vertical well completions for a gas hydrate production well employing the depressurization technique.

Petroleum Resources Management System

SPE/WPC/AAPG/SPEE | Document | 2010

This document consolidates, builds on, and replaces guidance previously contained in the 1997 Petroleum Reserves Definitions, the 2000 Petroleum Resources Classification and Definitions publications, and the 2001 “Guidelines for the Evaluation of Petroleum Reserves and Resources”; the latter docume...

Reserves Estimation: The Challenge for the Industry

Ferruh Demirmen, SPE, Petroleum Consultant | Document | 2007

The purpose of this paper is to discuss various issues related to reserves, review reserves-estimation procedures, and make suggestions for improvements. Emphasis will be placed on reserves evaluation at the preproduction stage in which estimation errors generally have the highest economic effect....

Society of Petroleum Engineers Petroleum Reserves Definitions

Society of Petroleum Engineers | Document | 1997

Reserves derived under these definitions rely on the integrity, skill, and judgment of the evaluator and are affected by the geological complexity, stage of development, degree of depletion of the reservoirs, and amount of available data. Use of these definitions should sharpen the distinction betwe...

Oil and gas sector promotes benefits of ISO and IEC standards

International Organisation for Standardization | Document | 2001

News: The International Association of Oil and Gas Producers (OGP) has launched a newsletter to promote its fruitful collaboration with ISO (International Organization for Standardization) - a partnership which has already resulted in 50 standards for the industry, with another 20 planned by the end...

Petroleum Engineering Standards Topic Overview

Adam Smith International | Document | 2017

This document is the PDF version of the "Petroleum Engineering Standards in the Oil and Gas Industry" Topic page on the Extractives Hub, which can also be found here -

The Practicalities of Goal-Based Safety Regulation

Proceedings of the Ninth Safety-critical Systems Symposium | Document | 2001

This paper will first discuss the motivation for adopting a goal-based regulatory approach, and then illustrate the implementation by describing SW01 which forms part of the CAP 670 [CAA 1998] regulations for ground-based air traffic services (ATS). We will then discuss potential barriers to the imp...

Fundamentals of Petroleum and Petrochemical Engineering

Uttam Ray Chaudhuri | Document | 2011

The petrochemical industry is still a growing industry. The manufacture of valuable petrochemicals from low-valued petroleum products has been the main attractive option for the refining industry investing in the petrochemical industry. This book have been prepared to provide a holistic working know...

Country Report on Petroleum and Mineral Resource Classification Kingdom of Cambodia February 2012

UNECE | Document | 2012

In Cambodia, there has not been clarified yet the Petroleum Resource Classification system. However, the CCOP’s Petroleum Resource Classification has been used in petroleum section since 1997, especially Cambodian National Petroleum Authority.

Drilling and Well Integrity Technical Fact Sheet

Santos | Document | 2016

These standards are based on the American Petroleum Institute (API), NORSOK and International Organization for Standardization (ISO) standards for well construction, well integrity and abandonment of a well. API, NORSOK and ISO standards are designed to assist industry professionals safely design...

Reserve Estimation Methods – Decline Curve

PetroSharp | Document | 2017

A decline curve of a well is simply a plot of the well’s production rate on the y-axis versus time on the x-axis. The plot is usually done on a semilog paper; i.e. the y-axis is logarithmic and the x-axis is linear. When the data plots as a straight line, it is modeled with a constant percentage de...

International Association of Oil and Gas Producers Position Paper on the development and use of international standards

International Association of Oil and Gas Producers | Document | 2010

OGP strongly supports the internationalisation of key standards used by the petroleum and natural gas industries. OGP’s goal is to assist in the development of international standards that can be utilised for the broadest possible application. This document clarifies this position.